For Buyers For Suppliers Community My TopTen
Duplicator Two

Duplicator Two

Price:
RMB 5000.00 - 6000.00

Contact Supplier:


Supplier Details

WANHAO PRECISION CASTING CO.,LTD

Free Member  (2013)

[ jinhua, ZH,China ]

Business Type:  Trading Company

Supplier has 3 products

Contact Details

Product Description

The WANHAO LCD Interface board is a DIY addition to your DUPLICATOR ONE that will allow you to interact directly with the machine. It has multiple buttons, multiple LEDs, and a 16×4 character LCD screen to provide feedback directly to you. Using this board, it is possible to run your WANHAO completely independently with no computer attached. You can set and read the temperature, view the progress of a build, and even start a new build from a file stored on the SD card. Of course you can also hack the firmware to make it anything else you might want as well.
This kit is DIY, and soldering is required. All the components are through-hole, so it is a great kit for beginners.

The Duplicator Two is our first dedicated 1.75 mm filament extruder. This extruder was designed from scratch, and contains a number of custom manufactured parts. We’ve learned a lot over our past extruder designs, and incorporated a lot of those lessons here: that’s why it’s smaller, lighter, and faster to build. And since it’s designed from the ground up for 1.75 mm filament, it’s light-years ahead of past designs in small-filament reliability.

The layer alignment is much better which results in nicer prints and higher resolution.
We’ve completely overhauled the drive system to give the optimum positioning accuracy. The entire system has been upgraded to sturdy 3/8? diameter linear shafting. This is probably overkill, but you can trust that the axes will be sturdy. We’ve also switched to self-aligning, sintered brass bearings. These are very forgiving to DIY assembly and provide a nice, smooth motion on the steel shafts. We’ve completely replaced the Z axis with a stepper driven, cantilevered stage. Guided by two of the linear shafts, this completely eliminates any Z wobble and results in nicely aligned layers. Using a high-angle lead screw, we were able to increase the speed of the Z axis from 150mm/minute to 1,000mm/minute. This means the layer changes are almost completely imperceptible.

Connect over USB and hit print — the machine will calibrate itself and start printing.
The new electronics have been designed to make the printing experience easier than ever. The DUPLICATOR TWO connects to your computer via a standard USB cable thanks to a USB chip on the motherboard. We’ve also added full endstop support so that you never need to touch the XYZ axes ever again. When you hit print, the machine will automatically home itself, heat up, and begin printing. All you have to do is sit back and relax while your DUPLICATOR TWO does all the work. Living in the future is awesome. Oh yeah, and the electronics are all inside, so you don’t have wires dangling everywhere.

Basic Information

Country:
China
Business Type:
Trading Company
Year Established:
2005
Total Employees:
11 - 50

About Us

Located in Jinhua City, WANHAO PRECISION CASTING CO.,LTD is one of major 3D printer manufacturer in China. Since 2008, Wanhao has invest big Money into 3D printer project and made great progress in ABS and PLA 3D printing. Till now we have developed from 3 staff to 20 employee and daily production rate from 1 pc machine to 20 machine. Wanhao 3D printer has enjoy great reputation in local China Market and with company’s opening up policy, Wanhao is expanding world market at great speed. All of you are welcomed to join our Wanhao Family and enjoy the interest of 3D Market.

With great efforts from everybody of WANHAO 3D Printer team, WANHAO start oversea 3D printer supplying since Aug 8th 2012. After accumulating 6 months experience in China local retail market, WANHAO has gathered good experience in manufacturing 3D printing Robot and after sales service. Based on these precious experience and hard working of our team, we believe WANHAO can provide more professional service and better up to date affordable 3D printer to awesome people all over the world.

WANHAO has involve in 3D printer filed since early 2011. Several Roommates used all their pocket money and bought one Thing-O-Matic from Makerbot. This precious awesome machine brought these college students great enthusiasm in 3D project making and help these buddy build their dream. On 1st Oct WANHAO Duplicate the Thing-O-Matic and named it DEPLICATOR ONE. This 1st Generation Made In China 3D printer has combined most of the advantage of RepRap and Makerbot, and upgrade the extruder to Non Block one.

In June 2012 WANHAO has invent it's 3D printer with LCD displayer which is now called DEPLIATOR TWO. This is geat step that free your computer that you don't have to print while keep your computer running. Just a simple SD card will do all the rest job.

On 1st Oct 2012 WANHAO 2 EXTRUDER Printer will be sold in our local market. This is big step for us.

In Aug 2012 WANHAO decided to join the world market to help more people to get access to the most awesome printing robot. WANHAO is delicate to supply most affordable and stable 3d printing machine for people who like MADE IN CHINA.

Member History

Year Joined:
2013
Membership Type:
Free Member

Send Supplier a Message

You must be signed in to contact this supplier.

Not a Member?

Already a member? Sign In

Community Tools

For Wholesale Buyers

For Wholesalers and Manufacturers

Click Here to Call Us: 800-928-6710