High Wear-resistance TPU

Fully support the wire pass all kinds of rocking, resilient recovery, and other tests. passed over 50000 wear-resisting tests, effectively preventing EV cable from wearing and cracking caused by repeated dragging under cement and sand conditions for a long time.



General Characteristics:



1. Environmental Friendly



HFFR materials completely comply with RoHS, REACH, Halogen-free, Phthalate 16P Dimethyl Fumarate, PFOPFOS, TBBPA, PAHs, EN71, etc. regulations, and rules.



2. Outstanding Flame Retardant



UL94 5VA-V0 1.5mm level, can firmly support wire and tube pass CSA FT-4, UL VW-1 and etc.



3. Excellent Physical Properties



UL 80?-125? heat-resistance can firmly support wire cable to pass UL 1581/758/62 and non- migration test, the properties are beyond the reference values of flexible wire standards.



4. Perfect-Surface Effect



Fine and smooth appearance and soft-touch feel, resolve the common defects such as heterogeneous, pits, whiten, sticky and etc.



5. Good Printable



High surface tension and polarity, can apply the main halogen-free ink to obtain good adhesion and scratch resistance, stand by UL2556.



6. Easy Processing



High efficiency and processing performance, can achieve 60100m/min rate using the same size extruder of PVC and decrease the probabilities of the cast, pellet, bulge, pits, etc. common defects significantly.



7. Stable Quality



Long-term experience of RD processing and application based on ISO9000 and 14000 quality systems.





Technical Data of High Wear-resistance TPU

Technical Data Sheet Model

Material Properties Test Standard Test Condition Unit 1190F-EHS-1076S

General Characteristics Material Category - - -

AppearanceLight/Semi-matte/Frosted - - -

Extrusion/Injection - - -

Physical Characteristics Hardness ISO 48 15S Shore A 90

Proportion ISO 1183 - g/cm³ 1.128

Melt Index ISO 1133-1:2011 190?/2.16kg g/10min 10

Brittle Temperature ISO 812 - ?

Mechanical Properties Elongation ISO37:2017 200mm/min % 425

Tensile Strength ISO37:2017 200mm/min Mpa 48.53

Tearing Strength ISO34-1:2015 500mm/min KN/m

Hot Air Aging Elongation Retention Rate ISO37:2017 - %

Tensile Strength Retention Rate ISO37:2017 - %

Electrical Performance Volume Resistivity ASTM D257 - Ohm-cm

Permittivity ASTM D150 - -

Combustion Performance Vertical Burning Test UL 94 3.0/6.0mm -

Oxygen Index ASTM D2863 - %



As a professional polymer compound manufacturer, we provide tpe elastomer, tpe elastomero termoplastico, tpu surface, tpu plastic material, tpu plastic and etc. For more information, please feel free to contact us!