FERRARI MASERATI SD3 System Diagnostics Scanner Tools Cover SD2/SD3

Brand Name : FERRARI MASERATI



Model Number : SD3



Certification : CE



Place of Origin : EU





Type : Engine Analyzer



Operating system:- : Runs on Windows CE, a robust, real-time



Microprocessor:- : 80 MHz Hitachi® SH3



Applicable Models : For FERRARI MASERATI Tester Tool



Memory Internal Flash :- : 32MB



Display :- : 1/4 VGA 240 by 320 pixels color, 3.5 in. 8.9 cm transflective display with touch screen, Anti-glare coated



System Card :- : 32 1 GB secure digital card



Warranty : Accepted 12 Months with Six Month Replacement



Replacement : 6 Months



Available:- : In Stock Ready For Shipment



RAM : In 32 MBstock



Full Refund::- : Accepted



Voltage:- : 12 V



Power : 9 W



Weight :- : Approximately 1.65 lb. 0.75kg with battery





The SD3 Diagnostics System is an electronic device for the diagnostics of electronic control units ECU installed in modern vehicles.

The SD3 diagnostics system is a palmtop device with a backlit color LCD display and a membrane keypad with twenty keys;

It is also equipped with:

Three standard RS232C serial lines;

Six standard ISO9141 / CARB / KEYWORD 2000 serial lines;

Two standard CAN serial lines multimeter in volts up to 200 V d. C. and Ohm up to 1 Mohm



It can be interfaced to a PC containing the software required to update the ECU diagnostics software through one of the following lines:

Standard RS232C serial line

USB serial line

Ethernet 10/100Mbit network

Ethernet Wireless 802.11b network



For better efficiency and faster data transfer between the PC and the SD3 unit, we suggest you use the USB line or an

Ethernet/Wireless network for communications.



The SD3 Diagnostic System is supplied with a suitcase containing:

SD3 Tester;

Serial cable for SD3/SD2 connection to PC SD3-CBL01 095970327;

Multimeter cable SD3-CBL02 095970328;

Power supply feeder SD3-CBL05 095970331;

EOBD SD3 diagnosis cable SD3-CBL06 095970332;

Diagnosis cable with SD2 bridle SD3-CBL07 095970333;

Connection cable for feeding among SD2 and SD3 bridle SD3-CBL08 095970334;

Cigar lighter socket feeder SD3-CBL09 095970335;

ISO 1 extension SD3-CBL10 095970336;

ISO 2 extension SD3-CBL11 095970337;

SD2 B-CAN adapter SD3-CBL12;

USB cable 095970330;

10/100 Mbps Ethernet cross-over cable 095970329;

SD3 wireless board; SD3 Manual 095970324;

SD3 Quick Reference;

Installation CD-ROM 095970326;

8 metal-point rods for Multimeter.

PC USB/Wireless board



To install the Basic SD3NET software on the PC, proceed as follows:

1. Power up the PC where the program has to be installed;

2. Insert the program CD supplied with the SD3 in the CD drive.

3. If the user has enabled the AUTORUN function on the CD drive, the installation wizard will launch automatically; In this case go to point 7, otherwise continue the procedure below;

4. Using your mouse, double-click on MY COMPUTER;

5. When the computer resources window opens, double-click on the CD icon where the SD3NET program has been inserted;

6. Double-clicking opens a window showing the contents of the CD. Double click on SETUP. EXE. The installation wizard will now run;

7. A window will be displayed for the selection of the language to use during the program installing.

8. The installation wizard displays a start window. Click on NEXT to continue;

9. You will be prompted to install Microsoft Framework NET 1.1 if it is not present. Always confirm and proceed with installation;

10. You are asked to name the directory in which the program will be installed we recommend leaving the default setting. Click on NEXT to continue;

11. You are asked to name the directory DATA in which the program will be installed we recommend leaving the default setting. Click on NEXT to continue;

12. The last window gives a summary of the previous selections. Press NEXT and the system starts copying the program to your PC.

13. When the installation has terminated you will be asked to reboot your PC. This is essential for the program to operate correctly;

14. When the PC has been rebooted, the SD3NET icon will appear on the desktop





FERRARI MASERATI SD3 System Diagnostics Scanner Tools Cover SD2/SD3 Until 2016 with California Models

The SD3 Diagnostic System is supplied with a suitcase containing :

Specifications

Original for FERRARI for MASERATI Tester including the 458 and California models

For FERRARI for MASERATI SD3 Tester .



Of The the SD3 Diagnostics the System IS AN Electronic Device for The Diagnostics of Electronic Control Units the ECU Installed in AND ECONOMICS Vehicles.

Of The the SD3 Diagnostics System IS A with palmtop Device with A backlit Color the LCD the display and A membrane Keypad with Twenty Keys;



It IS Also Equipped with :

-three Standard RS232C Serial Lines;

-SiX Standard ISO9141 / CARB / 2000 KEYWORD Serial Lines;

-two Standard CAN Serial Lines Multimeter in Volts Operating Tempe