Sand Blasting Cabinet
Some people also call sand blasting machines, sand blasting tank, portable sandblaster, open sandblasting machines and so on. The names are different, but they actually have the same meaning. Can working separated, but in most case it work with shot blasting room.
Main specification for Portable Sandblaster
Item Type Q0250 Q0250A-? Q0250A-?-LX
Volume of in-tank m3 0.5 0.7 0.82
Air pressure Mpa 0.5-0.6 0.5-0.6 0.5-0.6
Emitted dose caliber?10kg/h 1800-2280 1 gun 1800-2280 1 gun 1800-2280
2 guns 3600-4560 2 guns 3600-4560
Air consumption m3/min 6.1 1 gun 6.0 1 gun 6.0
2 guns 12.0 2 guns 12.0
Length of blasting pipe mm 7000 7000 2pcs 7000 2pcs
Control way Remote control Remote control Remote control
Dimension mm 10368121860 11209001890 10868122060
Weight kg 396 500 690
Power loss of shot blast tank
The air source configuration of the sandblasting machine is generally 6m³/min the air consumption of a single spray gun, if it is N, the required air source configuration is N6m³/min.
The air pressure required by the sandblasting machine is 0.5-0.6mpa if the pressure is too low, the sandblasting will be weak and the cleaning effect will be affected.
The amount of sandblasting/shotblasting per hour of the sandblasting machine is 1800-2100 kg.
Advantages of Sand Blast Cabinet
The metal parts of the sandblasting machine are basically not damaged, and the dimensional accuracy will not change;
The surface of the part is not contaminated, and the abrasive will not chemically react with the material of the part;
The sandblasting machine can easily handle the inaccessible parts such as grooves and concaves, and various sizes of abrasives can be selected for use;
The processing cost is greatly reduced, mainly reflected in the improvement of the work efficiency of the sandblasting machine, which can meet various surface finishing requirements;
Low energy consumption and low cost;
The sandblasting machine does not pollute the environment, eliminating the cost of environmental treatment;
Composition of Sand Blast Cabinet
Generally speaking, the components as following:
The sand blasting tank:
The thickness of the steel plate used for the different volumes of the tank and the root of the sandblasting machine is different. The larger the volume, the thicker the steel plate. This is mainly determined by the pressure vessel factory according to the actual situation.
There are two types of sand valve and sand valve: manual or pneumatic. Manually, it is necessary to manually open the sand valve, and gas is automatically opened by the gas.
Sandblasting pipe standard is 10m/20m
The use pressure of sandblasting tank is generally 8KG. The role of safety valve When the gas pressure exceeds 8KG, it will automatically deflate. So as to protect the sandblasting tank.
According to the material, it can be divided into boron carbide, alloy steel, tungsten carbide, iron and so on.
The most durable is boron carbide, and the service life is generally 500-700 hours.
Secondly, the service life of tungsten carbide and alloy steel is generally 300-400 hours,
Iron can only be used for 10 hours, few people have used it.
Electronic control system and other components.
Working Principle Of Portable Sandblaster
The working principle of sand blasting machine is different from shot blasting machine. The shot blasting machine uses a centrifugal force to perform shot blasting. The air powered sandblaster is powered by compressed air and sprays abrasives both metallic and non-metallic sand onto the surface of the workpiece. Due to the impact of pressure, the abrasive in the sand tank passes through the sand valve and blast tube to the spray gun, and the abrasive is ejected at a high speed, which changes the mechanical properties of the outer surface of the workpiece surface. Due to the impact and cutting effect of the abrasive on the workpiece surface, to obtain a certain degree of cleanliness and different roughness on the surface of the workpiece, improve the mechanical properties of the workpiece surface, so improve the fatigue resistance of the workpiece, increase the adhesion between it and the coating, and extend the coating. The durability of the film is also conducive to the leveling and decoration of the coating, removing impurities, noise and oxide layers on the surface, while roughening the surface of the medium, causing residual stress on the substrate surface and improving the hardness of the substrate surface.
Application range of sandblasting
Pre-treatment: all the blasting treatments before being covered, such as electroplating, painting, spraying, etc., the surface is absolutely clean, and at the same time greatly improve the adhesion and corrosion resistance of the covering layer.
Pre-treatment before cleaning the surface of the parts: descaling, residue and dirt of metal parts such as castings, stamping parts, welding p
Qingdao Binhai Jincheng Foundry Machinery Co., Ltd. Is the leading company of surface cleaning. professional machine manufacturer of shot blasting machine, sand reclamation line, V method production line, dust collector, core shooting machine and molding machine over 20 years, specialized in research, development, production, sale and service, always keep leading.In quality control, our company always regarded the quality as life, got ISO9001,CE,SGS certificates, and 10 people QC team to keep sure every machine is qualified.11 professional engineer team, the strong RD team, always keep new design and got many national patent. All your requirement can be realized in Binhai, and ensure supply the best solution and technical support for you in first time.Binhai machine are popular in many countries, they are selling well in all cities and provinces around China, also exported to USA, Australia, Iraq, Vietnam, Indonesia, Guatemala, Russia, Thailand, South Korea, Sri Lanka, Argentina, Chile, Iran, Brazil, and so on. also accept OEM and ODM.Choose Binhai Jincheng, you choose a Win-win cooperation partner.We welcome you visit us.
Send Supplier a Message
Not a Member?
Already a member? Sign In