Sepna® Brand Two Component Silicone Gel for electronics potting
Packaging and Delivery
SI2715 is two-component transparent self-healing silicone gel, after cured it will become quite elastic material with buffer and self-recovery. Used to isolate moisture and other noxious pollutant from contacting the circuit board, also used as dielectric of high voltage. The other usage is stress relief for protecting circuit and components from high temperature and mechanical stress.
1.1:1 addition type, good adhesive strength and self-healing
2.High elongation, excellent flexibility for mechanical stress relieving
3.Low oil penetration after cured, good anti-poisoning property
4.Good dielectric in high temperature for high voltage protection
5.Excellent aging resistance and weatherability
6.Excellent waterproof, corrosion prevention, moisture proof and chemical media resistance
Used for encapsulation of various modules, semi-conductor, IGBT, automotive ECU module, IC chip, weighing sensor, waterproof connector.
#Directions for Use
1.Mix Part A and Part B by 1:1 mass ratio, after evenly mixed, pouring directly into the components or modules as per requirements.
2.Still the potted component to let out the bubbles. It can be heat cured, about 30mins in 80°C. It needs about 4-5hours cured under room temperature. Require 24 hours to achieve surface without obvious oil layer.
Vacuum defoaming can improve the performance of cured product.
Seal the remaining products tightly after use.
Low temperature will slow the curing speed; heat curing is recommended.
It's hard for SI2715 to cure if contact with sulfur, amine or Sn.
#Packing and Storage
Part A—10 KG/Bucket, Part B—10 KG/ Bucket.
When stored at or below 25°C in the original unopened containers, this product has a usable life of 12 months from the date of production. Sampling test is necessary for products which exceed shelf life before taking use.
MORE PRODUCT INFORMATION AT OUR SITE WWW.SEPNA.CC, EMAIL TO email@example.com
SEPNA CHEMICAL IS SEEKING ADHESIVE DISTRIBUTORS AROUND THE WORLD.
Shanghai Sepna Chemical is a professional sealant and adhesive manufacturer over a decade. We supply adhesives and sealant in automotive, construction and electronic industry. Including polyurethane adhesive for auto glass, construction polyurethane filling adheisive, and silicone, epoxy adhesive in application for electronic components ect..
WE ARE LOOKING FOR ADHESIVE DISTRIBUTORS AROUND THE WORLD. MORE INFORMATION AT OUR SITE WWW.SEPNA.CC, MAIL TO firstname.lastname@example.org
Send Supplier a Message
Not a Member?
Already a member? Sign In